Why Leave Cleaning Of Concrete Pool Deck To Professionals?

Every surface has different properties, and the surface of wood, tile, and carpet, etc., have less friction. However, in the case of concrete, the friction is higher. Concrete has many pits and pores along its surface and is prone to cracks, splits, and other damages. The soil might burst into these pits and pores, which will require pressured water for removal. It makes the dust in concrete stickier and hard to remove. That is why cleaning the concrete pool deck is harder than other deck surfaces.

Cleaning of concrete pool deck requires a person to have complete knowledge of cleaning solvents. However, in most cases, homeowners try to tackle the concrete pool cleaning on their own. In the beginning, it might seem quite similar to any other cleaning job. You might even think of using either a garden hose or a rented pressure washer.

Well, did you know improper use of a rented pressure washer might strip concrete paint? The pressure of water should be according to the hardness of the deck otherwise, it might crumble the concrete. Not only this, there are several things to be taken care of. To simplify it for you, here is the solution for most of your possible queries:

1. After How Long A Concrete Pool Deck Needs To Be Washed?

It is the most common question that pool deck owners have. The washing frequency of the concrete pool deck can depend upon weather conditions. Usually, the washing frequency of deck cleaning six months, but stormy weather can deposit a layer of sand and grit on it. Due to this, you might need to clean the deck within short intervals. So, the washing frequency of the pool deck can vary from place to place.

2. How Long Does It Take To Pressure Wash A Deck?

There are several factors affecting the overall time to clean a concrete deck with pressure washing. It includes the size of the deck and the dirt build-up on it. Generally, cleaning of concrete deck power washing can take from 4 to 8 hours. You can schedule an appointment with your professionals accordingly for winding up the cleaning task at the correct time.

3. Pressure Washer Or Power Washer, What To Choose?

First of all, you have to understand that pressure washers and power washers are not the same. The main difference between both of them is the temperature of water used for cleaning. In power washing, hot water is used, whereas, for pressure washing, the temperature of the water is normal. For the concrete pool deck, you should contact pressure washers.

Well, did you know pressure washers have different types too? Gas-powered and electric-powered, you can hire either of them, depending on the preferences. An electric-powered pressure washer is lightweight and easy to manage, and it generates less noise too. On the other side, a gas-powered pressure washer produces slightly higher noise but doesn’t need electricity and extension cords. Whether it is about saving on your electricity or avoiding noise in the neighborhood, you can choose after deciding with your service provider.

4. What Else You Need To Take Care After The Completion Of The Washing Process?

After the washing, your deck needs proper time to dry before putting it into use. Do keep in mind that you must not allow extra water for storing on the deck. Otherwise, it can seep under the concrete and loosen its structure bonding. Continuous loosening of the structure can create a muddy mess below it.  

Generally, a newly washed concrete pool deck takes 48 hours to dry, but there are several factors that can increase or decrease the average drying time. A sun-facing deck requires less time to dry, whereas a deck that is constructed in a shadowy place takes more time. There can be many other things you might not be aware of, but a professional cleaner can be, so don’t forget to discuss it with them.

5. Why is it Not a Good Idea to Pressure Wash the Concrete Pool Deck on Your Own?

Being a homeowner, it is obvious of not being aware of all the essential solvents and chemicals required for cleaning the deck. Due to this, you might use the usual detergent or some wrong chemical. It might clean the deck but can take away the shine, and you definitely won’t want it! For a shinier and clean deck, the right solvents are necessary, and a professional service provider is aware of it. It gives you more reason to approach a service provider.

In addition to possessing proper knowledge of cleaning solvents, professionals understand the composition of concrete too. It helps them to evaluate the limit of water pressure required for effective cleaning. They also make use of special surfactants and use brush cleaning. It dissolves grit, sand, and ground mud, as well as chlorine and pool chemicals to protect the concrete from becoming dry and damaged.

6. Is Pressure Washing Suitable For Painted Concrete?

Paint on the concrete might get spoiled with the use of pressured washing. So, you have to be extra cautious with a painted concrete pool deck. Even If you are using a pressured garden, there are possibilities that paint gets ruined if held at the wrong angle. However, experienced service providers are aware of the right extent of pressure, the correct way to clean it, and a lot of other things. They can be relied upon for decreasing the direct water strike on the paint and will clean the deck without stripping the paint.  

About the Author:

Robin,

Washing Services (Blogger)

I’m into power and pressure washing services for the past five years. From my college days, I’m ardent about sharing my knowledge, and so, whatever I have learned over the years, I want to share with my readers. I usually write on pool deck cleaning services, solvents, and pressure washing. You can learn more about professional services for washing of your properties.