Best Ways to Get a Residential Lock Replacement
When relocating, safety should always be a primary priority. Even if the largest benefit is merely an additional piece of mind, you’ll be better off going the extra mile when it comes to the safety of your new house. So, with that in mind, here are the best ways to get a residential lock.
The tools you will need are:
-
New locks
For each door you want to rekey, you’ll need a new lock. Each of the lock parts you’ll need, including mounting hardware and the inside turner, is generally included in a basic deadbolt kit. If at all possible, get a replacement lock with the same brand, model, and manufacturer as the one you’re replacing. This will guarantee that it is a good fit.
-
Measuring tape
Before you go to the hardware shop, take measurements. Although most new deadbolts are adjustable, you should still double-check that you’re in the correct range. An excellent summary on how to measure door locks may be found here.
-
Screwdriver
Determine if you’ll need a flathead or a Phillips head by looking at your current gear. You may need both types of screwdrivers depending on the screws in bolt kit.
How to replace a residential lock
Step one:
Throw away the previous lock and all of its components. This is a simple task. Remove the screws, as well as the turn plate, from the internal part present inside the bolt you should now be able to look through the hole. Unlock the gate to examine the present inside the bolt (the thin section that runs along the inside of the door) and discard the nails too. Also, discard the door’s lock hardware.
Step two:
Install the new deadbolt. Install the bolt hardware in place of that previous lock. On one side of most deadbolts, you’ll see the word “up” to assist you figure out where to put it. To lock the hardware in place, use the mounting hardware included in your deadbolt installation kit.
Step three:
Put the bolt in place. Both the bolt part portion and the rotating section of the bolt will fit into slots in the deadbolt. Assemble the parts in the proper locations and fasten them using nails included in your bag of lock hardware.
Step four:
Test. Instead than presuming that the bolt works, always verify it after installation. To do so, ensure it locks and unlocks with the key, as well as the internal turner.
That’s all there is to it! Hold on to your replacing efforts by beginning with the front door of your home, as this is likely the door to which the former owner of the home shared keys with others. Change the locks on any additional exterior-facing doors after that, as well as your garage code. Interior doors can also have their locks changed, although this does not have to be done immediately away. For more information about locks contact Speedy Locksmith and they will be able to help you with any question you may have.
How often should the locks be changed?
You are not alone if you have never changed your door locks or done so so long ago that you can’t recall. Unfortunately, many individuals neglect this simple security step, putting their property at risk. Unlike other household products, door locks do not require routine maintenance. You won’t have to change them as often as the filters in your HVAC system or the oil in your automobile, for example.
It is recommended that you update your door locks every seven years, although this is dependent on a number of variables. If the locks are infrequently used, you may be needed to replace them much sooner than the suggested seven-year period.