6 Secrets of Better Garage Door Maintenance and Repair
Are you aware of the significance of your garage door? You must have, particularly on the days when it is not working properly. There could be many reasons behind a malfunctioning garage door and luckily, most of them can be taken care of by regular maintenance.
Although it appears to be a simple entryway for your garage, it does a lot more than that, especially when your house is linked with it. A garage door can make your house either safe or unsafe just like it can impact the curb appeal of your house.
If you want to avoid the frustration and unsafety of dealing with a damaged or poorly operating garage door and looking for top garage door services in Fort Mill SC, we have got you covered. The wisest use of your time and energy is on more frequent and thorough maintenance and repair. Here are 6 secrets listed by garage door experts and proactive homeowners.
Observe Garage Door Operation Carefully and Keep it Lubricated
Relatively easy and doable. Please pay close attention to your garage door when it is moving. It is the first step in maintaining it and should be done at all times. Examine the process by which the garage door raises and falls carefully. Does it rise evenly? If you see motions that are jerky or hear noises that sound like scraping, this is a strong indication that your garage door requires inspection and professional repair.
A garage door in its perfect condition is silent and operates smoothly. In addition, make sure that the rails, wires, and springs on both sides of your garage door look the same and symmetrical. Any abnormalities should be fixed without any delays.
One of the best ways to prolong the life of a garage door and keep it in good working order is to lubricate the moving parts. This is because lubrication allows for easier movement. Lubricating the moving parts of your garage door can prevent you from having to spend money on a replacement door in the longer run.
The movable parts of a garage door should be lubricated at least once a year. Make use of a lubricant of superior quality, such as white lithium grease. If you want to coat overhead springs, the best method is to use a spray lubricant. It demands very little expertise but functions very well.
Make sure the Garage Door Is Properly Balanced and the Hardware is Secure
Throughout its lifetime, your garage door will go up and down thousands of times. As an average door weight above 150 pounds, the movement, and vibration, over time, could cause the track and the hardware to become loose. Keep an eye out for any loose bolts or brackets that hold the door’s tracks in place, and if required, use a socket wrench to tighten them. Also, ensure that you examine the door brackets that hold the door’s track for any damages.
Check that the tension on the garage door springs is set appropriately. If the electric motor is not properly balanced, it will have to put in twice the amount of effort. When a garage door is properly balanced, it requires just a small amount of force to move in either direction (up or down).
Make sure the door doesn’t move while it’s only cracked open a little bit. If it does not, this may indicate that the springs are either too worn down or not properly balanced. Adjusting or replacing the springs on a garage door should never be attempted by anybody other than a trained professional.
Keep The Door Weatherstripping at Its Best
The rubber weatherstripping for your garage door can be found at the very bottom of the door. Its principal function is to protect against water, filth, dust, rodents, and cold air. It may also protect against rats. In addition to that, there is weatherstripping installed around the top, bottom, and both sides of the garage door. Make sure the weatherstripping is in good condition, inspect it regularly, and replace the seal if you find that it is cracked or brittle.
Take A Look at The Auto-Reverse Feature to Make Sure It’s Operating Properly
A safety function known as auto-reverse is included in automatic garage door openers. A pressure sensor system can be activated by positioning an object on the ground so that the door will halt and reverse direction when it comes into contact with the object. Wave your hand or foot in front of the sensor to see if the photoelectric system is working. When it senses that there is something in the way, the door will automatically close.
Get Rid of Dust, Dirt, And Obstructions
Regularly inspect the rails to ensure that they are free of debris and rust. If you want a smooth action for your garage door, you should use a level to make sure that the tracks are properly horizontal and vertical.
Always remember to maintain the outside of your garage door looking neat and tidy. A steel door should be checked for rusted areas before being installed. If the door in question is made of wood, pay particular attention to any warping or paint that is flaking. In addition, use a cleaner designed for many purposes to clean the garage door.
Inspect and Tighten Any Cables or Rollers You May Have
From a secure distance, you need to inspect the lift cables for any damaged strands of cable. However, you should never put your hands anywhere near the high-tension cable wires since they pose a risk if they break.
The garage door rollers should be inspected at least twice a year, as recommended by most professionals. You’ll also have to replace them after five to seven years. Make it a priority to immediately replace any rollers that are broken, worn, or chipped in any way.
When it comes to fixing more major issues with your garage door, such as realigning the tracks or replacing the springs, you should always call expert professionals. In case the door is damaged beyond repairs, find the best professionals by searching for “garage door installation services near me Fort Mill SC.”